Produktai skirti prekės grąžinimo atostogų metu (51)

SEACOMP Engineering and Design for Manufacturing (DFM) Enhance your product with our design engineering and design for manufacturing (DFM) services. We'll review your product design and ensure it meets your functional requirements and give any recommendations on how to best meet your product goals. Your product design will also be prepped so that it is ready for manufacturing. All of our design engineering services are completed in-house at our U.S. headquarters.

AMETEK Specialty Metal Products uses a wrought powder metallurgical process to ensure the highest purity finished products. Our main strengths lie in the processing of Nickel, Iron and Cobalt containing alloys amongst other available materials. The processing of these materials begins with the consolidation of powder through a roll compaction process and followed by a controlled atmosphere sintering. Further reduction of the material is performed solely under cold working temperatures to reduce the introduction of non-metallics and annealing is performed under controlled atmospheres. AMETEK Strip Products are produced in ranges between .002” (0.05mm) and .080” (2.03mm) thicknesses in a full range of tempers and widths to 22” (558.8mm) while maintaining special capabilities to produce materials outside of these ranges for special applications. This process lends itself to the production of small but easily reproducible lots of highly specialized alloys

AMETEK Specialty Metal Products has applied the high purity wrought powder compaction process to Ductile Cobalt Alloys in order to produce multiple ductile cobalt strip products generally used by weld wire manufacturers as sheathing for flux cored and metal cored hardfacing materials. These alloys range from 80 to 95% cobalt with Iron or Iron-Nickel additions to improve ductility for drawing operations.

austenitic Chromium-Nickel stainless steel, excellent corrosion resistance,high - SS 305 is an austenitic Chromium-Nickel stainless steel with excellent corrosion resistance, and is suitable for very severe cold forming operations. A high nickel content reduces the work hardening rate so that it can be formed into electronic components and remain non-magnetic. The alloy is readily formable and work hardens slowly.It has good resistance to nitric and sulfuric acid solutions although it will not resist halogen acids. The alloy can be satisfactorily welded, brazed, and soldered. Available Sizes: SS 305 is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.050” (0.0127 mm to 1.27 mm) in widths up to 12.0” (304.8 mm). It is also available in foil as thin as 0.000200” (0.00508 mm) in widths of 4.0” (101.6 mm) maximum. The material conforms to ASTM A240, QQS-766, and UNS S30500. Density:0.29 lbs./cu.in. Melting Point (Approx.):1400°C Electrical Resistivity @ R.T.:72 Microhm·cm Thermal Expansion Coefficient (0° to 100°C):17.3 x 10-6 /°C Thermal Conductivity @ 100°C:16.3 W/m·K Magnetic Permeability (Annealed: H= 200 oersteds):1.068

Contract Manufacturing by SEACOMP Get your concept to physical product with our electronics manufacturing services. Use our engineering team to get your design ready for mass production or let us take your perfectly designed product and build it at scale. We help launch electronic devices for home automation, industrial controls, consumer products, and medical devices. Manufacturing is completed in our wholly-owned China facility that is ISO 13485 certified. Our production capabilities include: - PCB Assembly, Surface Mount (SMT), Through Hole Assembly - Wave Soldering - Reflow Soldering - Plastic Injection Molding (vertical and horizontal) - Ultrasonic Welding - Cable Assembly and Over-Molding We also provide the finished assembly of your product before it is shipped anywhere in the world: - Laser Marking - Pad Printing - UV Ink Curing - Label Printing - UV Light Metering - Box Build Assembly - Bulk or Retail Packaging - Warehousing Contact us to learn more.

SS 17/4 PH® is a precipitation hardenable Martensitic stainless steel with high strength, and good corrosion resistance. This makes it perfect for use in metal diaphragms, for both aerospace sensors and burst discs. It is easily heat treated from the annealed temper. The corrosion resistance of the alloy is comparable to SS 302. It is heat treated at 900° F/1 Hour for highest strength. Other thermal treatments can be utilized to provide greater toughness and improved formability. Joining of the alloy is accomplished by the usual methods that are effective for stainless steel. Available Sizes: SS 17/4 PH® is available from Hamilton Precision Metals as strip product in thicknesses from 0.001” to 0.050” (0.0254 mm to 1.27 mm) and widths up to 12.0” (304.8 mm). The material conforms to AMS 5604, ASTM A693 and UNS S17400. Density (Heat Treated):0.282 lbs/cu.in. Electrical Resistivity (Heat Treated):80 Microhm·cm Thermal Conductivity @ 150°C:17.9 W/m·K Magnetic Attraction:Yes

SS 430 is a corrosion and heat resistant ferritic Chromium Steel. It can be polished to appear similar to Chromium plate. The material is magnetic in both annealed and cold rolled tempers. The alloy can be readily blanked and formed. The material can be resistance welded, brazed, and soldered. SS 430 is resistant to atmospheric corrosion and fresh water, but it not resistant to most salts and sea water. It is resistant to scaling by oxidation up to about 1400°F. Available Sizes: SS 430 is available from Hamilton Precision Metals as strip product in thicknesses from 0.001” to 0.050” (0.0254 mm to 1.27 mm) in widths up to 12.0” (304.8 mm). The material conforms to ASTM A240, FED QQS 766, and UNS S43000. Density:0.28 lbs/cu.in. Melting Point (Approx.):1425°C Electrical Resistivity @ R.T.:60 Microhm·cm Thermal Expansion Coefficient (0° to 100°C):10.5 x 10-6 /°C Thermal Conductivity @ 100°C:26.1 W/m·K Magnetic Permeability:800

Our high-quality stainless steel flake products are used for high-performance protective paints and industrial coating applications. Produced from our own 316L stainless steel powder, the flake offers numerous benefits for paint additive applications: Corrosion resistance; resistance to alkaline cleaners and detergents Abrasion resistance High specular reflectance Paint Additive Applications Maintenance Coatings: Corrosion protection for equipment exposed to hostile elements and food processing or pharmaceutical plants. Powder Coatings: Automotive trim, wheels, suspension, and under the hood parts (particularly motorsports). Outdoor furniture and bicycles. Architectural Coatings: Gives a metallic look to masonry and exposed metal. Cookware Coatings: Promotes abrasion resistance and heat transfer in non-stick coatings.

Titanium exhibits a unique combination of properties including excellent corrosion resistance, high temperature resistance, and outstanding strength to weight ratios. Titanium is produced as commercially pure or alloyed. Commercially pure titanium is typically used in implantable medical applications whereas the titanium alloys are produced with the addition of vanadium or aluminum for applications such as aerospace. Hamilton Precision Metals processes strip and foil products in Titanium CP (Grade 1, Grade 2, Grade 4) and Titanium 3Al-2.5V (Grade 9).

SS 304L HN is an austenitic Chromium-Nickel stainless steel offering the optimum combination of corrosion resistance, strength and ductility. This makes it good for use metal diaphragms, for both aerospace sensors and burst discs. It has been remelted by ESR refining and conditioned to produce a minimum non-metallic impurity level. This will result in a surface that is most favorable for minimizing failures during severe forming operations. The high Nickel composition provides optimum ductility and formability from the annealed temper due to low work hardening rate. The low carbon content reduces susceptibility to carbide precipitation during welding. Density:0.284 lbs./cu.in. Melting Point (Approx.):1400°C Electrical Resistivity @ R.T.:72 Microhm·cm Thermal Expansion Coefficient (0° to 100°C):17.3 x 10-6 /°C Thermal Conductivity @ 100°C:16.3 W/m·K Magnetic Permeability (Annealed: H= 200 oersteds):1.02 Max

MP35N* is an age hardenable nickel-cobalt base alloy that has a unique combination of properties - ultra high strength, toughness, ductility and outstanding corrosion resistance. MP35N resists corrosion in hydrogen sulphide, salt water and other chloride solutions. It also has excellent resistance to crevice and stress corrosion cracking in sea water and other hostile environments. Suitable where a high combination of strength, high modulus values and good corrosion resistance are required. Applications for this alloy also include medical devices and dental products. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):502 J/kg/°K Thermal conductivity:11.2 W/m/°K Thermal Expansion:12.8 μm/μm/°C Modulus Elasticity:234 Gpa Electrical Resistivity:6.21 μohm/cm Density:8.43 g/cm3

Superior Tube is committed to improving healthcare options for patients, and to helping surgeons save lives. As such, we manufacture a range of specialized welded and seamless tubing products for various areas of the medical device industry, including cardiac stents. Stents are small, expandable tubes, usually made of metal mesh, and are used to treat narrowed or weakened arteries. In patients with coronary heart disease, stents are implanted in order to open narrowed arteries during a procedure called percutaneous coronary intervention, or angioplasty. Heart stents can also help relieve chest pain and aid in the prevention of heart attacks. Ever since our tubing was used in the earliest cardiac stent implants in 1987, Superior Tube has been an industry leader in the manufacture of implant grade tubing for both coronary and peripheral stents. Please note that we have a minimum order value of £10,000.

SS 304L is an austenitic Chromium-Nickel stainless steel offering the optimum combination of corrosion resistance, strength, and ductility. These attributes make it a favorite for many mechanical switch components, and use in surgical instruments. Low carbon content reduces susceptibility to carbide precipitation during welding. The alloy is readily formed in the annealed temper.SS 304L may be joined by all commonly used brazing and welding methods including oxyacetylene. The corrosive resistance to acids is generally very good with the exception of halogen acids. Available Sizes: SS 304L is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.050” (0.0127 mm to 1.27 mm) in widths up to 12.0” (304.8 mm). It is also available in foil as thin as 0.000200” (0.00508 mm) in widths of 4.0” (101.6 mm) maximum. The material conforms to ASTM A240, ASTM A666, FED QQ-S-766, MIL-S-4043, UNS S30403. Density:0.284 lbs./cu.in. Melting Point (Approx.):1400°C Electrical Resistivity @ R.T.:72 Microhm·cm Thermal Expansion Coefficient (0° to 100°C):17.3 x 10-6 /°C Thermal Conductivity @ 100°C:16.3 W/m·K Magnetic Permeability (Annealed: H= 200 oersteds):1.02 Max

corrosion resistance alloy, surgical instruments, strength and ductility,strip - SS 302 is an austenitic Chromium-Nickel stainless steel offering the optimum combination of corrosion resistance, strength and ductility. These attributes make it a favorite for many mechanical switch components, as well as surgical instruments. The alloy is readily formed in the annealed temper. SS 302 may be joined by all commonly used brazing and welding methods including oxyacetylene. Caution should be used to avoid cooling slowly through the range of 900° to 1600°F where carbide network could form and reduce corrosion resistance. This characteristic is diminished due to the typically low carbon composition of Hamilton’s SS 302. The corrosive resistance to acids is generally very good with the exception of halogen acids. Density:0.284 lbs./cu.in. Melting Point (Approx.):1400°C Electrical Resistivity @ R.T.:72 Microhm·cm Thermal Expansion Coefficient (0° to 100°C):17.3 x 10-6 /°C Thermal Conductivity @ 100°C:16.3 W/m·K

Providing the highest quality and desired quantity to you in today's competitive market and meandering economy

hooks for living room

Alloy 22, is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungsten content give good resistance to reducing media. This nickel alloy also has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions. Alloy 22 has resistance to oxidizing acid chlorides, wet chlorine, formic and acetic acids, ferric and cupric chlorides, sea water, brine and many mixed or contaminated chemical solutions, both organic and inorganic. This nickel alloy also offers optimum resistance to environments where reducing and oxidizing conditions are encountered in process streams. This is beneficial in multi-purpose plants where such “upset” conditions occur frequently. Please note that we have a minimum order value of £10,000. Specific Heat (0-100°C):414 J/kg/°K Thermal conductivity:10.2 W/m/°K Thermal Expansion:6.9 μm/μm/°C Modulus Elasticity:206 Gpa Electrical Resistivity:4.48 μohm/cm Density:8.69 g/cm3

Our Electrolytic Copper (C11000) shaped wire is used in magnetic applications such as superconductors in MRI scanners that require high copper content and rectangular cross sections. Electrolytic copper wire products have engineered channels to accept round superconducting wire such as Nb based low temperature wires. We have the expertise to manufacture C11000 copper wire to your exacting specifications and wire shapes. Advantages Our C11000 material for channel wire is produced in long lengths to minimize joints and is tightly tolerance to ensure field integrity. Advantages include: Sophisticated powder metallurgy process achieves high purity, consistency and close composition control Improved die wear, formability and platability Superior dimensional control Stringent quality control to ISO 9001

Our standard offering of nickel chrome strip products contain a chrome percentage ranging from 20%, 30% and 35% chrome (balance nickel). Silicon can also be added to the product to promote de-oxidation during the welding process The 35% chrome (AMETEK 835) is one of the highest chrome containing products offered in the industry and our high purity process allows for elongations above 45% for even those products containing silicon additions between 1% and 2%.

Superior Tube supplies high pressure tubes that exceed current industry standards and we supply high quality products that are used in oil and gas extraction, high pressure liquid chromatography, military applications, water jet cutting, and more. Our tube mill manufactures high pressure tubing in straight lengths, and in a variety of corrosion resistant austenitic, nickel alloys, and stainless steels. Sizes run from 0.050” right up to 1.250” outside diameter, with wall thicknesses between 0.0175” and 0.218”. Operating conditions can require our products to be service rated above 60,000psi operating pressure, with tensile strengths greater than 220ksi. Please note that we have a minimum order value of £10,000.

Shunt Manganin is a Copper-Manganese resistance alloy used for shunts in various high current applications. The alloy has a low temperature coefficient of resistivity with peak resistance at about 50°C. The thermal EMF vs. Copper is very low. The alloy can be easily formed from the annealed temper.The maximum recommended operating temperature in air is 200°F. Available Sizes: Shunt Manganin is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005 to 0.053” (0.0127 mm to 1.346 mm) in widths up to 12.0” (304.8 mm). It is also available in foil as thin as 0.000100” (0.00254 mm) in widths of 4.0” (101.6 mm) maximum. Density:0.296 lb/in³ Melting Point (Approx.):985°C Electrical Resistivity @ R.T.:38.1 Microhm·cm Temperature Coefficient of Resistivity (40° to 60°C):±15 PPM/°C Electrical Conductivity @ R.T:19.8 W/m·K Magnetic Attraction:None